Fujitsu M3097DG Oem Manual page 38
Image scanner
Hide thumbs
Also See for M3097DG:
- Operator's manual (70 pages) ,
- Cleaning and maintenance (59 pages) ,
- Installation procedures manual (9 pages)
Advertisement
(4)
Equal to White
[A.4.7 SET WINDOW command/DTC mode]
Equal to White specifies the result of binaizing when the value of a pixel equals the threshold.
The default is Equal to White OFF.
The effect of this parameter is slight but, if the scanned image text is bold, set to Equal to White.
If the scanned Image text is too narrow or lost, set to Equal to Black (Equal to White OFF).
Parameter
Equal to White ON
Equal to White
OFF
Table 3.10 Parameter of Noise Removal
Value
B'xxxxxxx1'
Equal to White
B'xxxxxxx0'
Equal to Black
3.3 Optional image function
Effect
Equal to White ON
Default
3-17
Advertisement
