Table of Contents
Advertisement
Warning
After pressing Enter, you will find the networking
setting in the screen has been changed, but you
still have to press "S" to save your changes
before escaping this screen.
Warning
The wrong message will show while you set "0"
for the first segment of the subnet mask and
default gateway (000.xxx.xxx.xxx).
3.1.2 Password Configuration
In the password configuration, you need to key-in the old password, new
password and confirm the new password to finish the password change
process. An error message will be shown if you want to save before you
finish the whole process.
Figure 3.6: Error Message in Password Configuration
27
Chapter 3
Advertisement
Table of Contents
