Configuring Rate Limits; Figure 5-15 Port Configuration - LevelOne GSW-1676 User Manual

C
ONFIGURING THE
Web – Click PORTS, Settings.

Configuring Rate Limits

This function allows the network manager to control the maximum rate
for traffic transmitted or received on an interface. Rate limiting is
configured on interfaces at the edge of a network to limit traffic into or out
of the switch. Traffic that falls within the rate limit is transmitted or
received, while packets that exceed the acceptable amount of traffic are
dropped.
Rate limiting can be applied to individual ports or trunks. When an
interface is configured with this feature, the traffic rate will be monitored
by the hardware to verify conformity. Non-conforming traffic is dropped,
conforming traffic is forwarded without any changes.
5-22
S
WITCH

Figure 5-15 Port Configuration