Desktop Or Shelf Mounting; Figure 3-4 Attaching The Adhesive Feet - LevelOne GSW-1676 User Manual

16-port gigabit w/ 4-port sfp web smart switch

Hide thumbs Also See for GSW-1676:

Table of Contents

NSTALLING THE

3. If installing a single switch only, turn to "Connecting to a Power

Source" at the end of this chapter.

4. If installing multiple switches, mount them in the rack, one below the

other, in any order.

Desktop or Shelf Mounting

1. Attach the four adhesive feet to the bottom of the first switch.

2. Set the device on a flat surface near an AC power source, making sure

there are at least two inches of space on all sides for proper air flow.

3. If installing a single switch only, go to "Connecting to a Power Source"

at the end of this chapter.

4. If installing multiple switches, attach four adhesive feet to each one.

Place each device squarely on top of the one below, in any order.

3-6

WITCH

Table of Contents