Table of Contents
Advertisement
Field Attributes
• Port - The front-panel port-number of the port. This cannot be changed.
• Mode - Select the IP filter mode for this port.
• Disabled - Disable the source IP filter.
• Static - Enable the IP filter with configured values in the Address and
IP Mask fields.
• DHCP - The IP address for the device connected to this port will be
automatically assigned by DHCP server and only frames with the
assigned IP address are allowed to access the network. The IP
Address and IP Mask fields will be filled with the assigned IP address
and 255.255.255.255 individually by software.
• IP Address - Set up IP addresses to allow access. Frames with IP
address outside the allowed range will be dropped.
• IP Mask - Sets an IP mask to allow access for a specific subnet. To allow
frames with a specific IP address, set the mask to 255.255.255.255.
• DHCP Sever Allowed - Enables or disables access to a DHCP server
on a port. When DHCP Server Allowed is selected on a port, the port is
allowed to be linked to a DHCP server. This can prevent the access of
unwanted or unsolicited DHCP servers.
W
C
EB
ONFIGURATION
5-37
Advertisement
Table of Contents
