Table of Contents
Advertisement
Leave at least 10cm of space at the front and rear of the hub for
ventilation.
Install GSW-2475T on a sturdy, level surface that can support its
weight, or in an EIA standard-size equipment rack.
For
information on rack installation, see the next section, Rack
Mounting.
When installing GSW-2475T on a level surface, attach the rubber
feet to the bottom of each device. The rubber feet cushion the
hub and protect the hub case from scratching.
Figure 1. Attach the adhesive rubber pads to the bottom
Rack Mounting
The switch can be mounted in an EIA standard-size, 19-inch rack,
which can be placed in a wiring closet with other equipment. Attach
the mounting brackets at the switch's front panel (one on each side),
and secure them with the provided screws.
Figure 2. Combine GSW-2475T with the provided screws
10
Advertisement
Table of Contents
