CYBEX VR Owner's Manual page 12

3. Inspect bars and handles for wear, paying particular attention to tab area connecting points.
Replace all worn handles immediately.
! CAUTION: Replace all worn handles immediately. Do not use if less than 1/8" of
Figure 5
4. Inspect snap links for proper latching (indicates wear).
Replace all worn snap links immediately.
5. Inspect all labeling for readability. This includes instructional placards, warning and caution
decals.
Replace all warning labeling immediately.
6. Inspect all weight stacks for proper alignment and operation.
NOTE: Correct all improper alignment and operation issues immediately.
7. Wipe Weight Stack Guide Rods and Leg Press Linear bearings clean over entire length.
Lubricate with a light coat of medium weight automotive engine oil.
Maintenance
Page 5-4
Cybex VR Owner's Manual
material remains to the edge. See Figure 5.
Attachment Hole
NOTE: Replace bar if less
than 1/8" of material
remains to the edge.