CYBEX VR Owner's Manual page 11

Weekly Procedures
1. Inspect all nuts and bolts for looseness. Tighten as required.
2. Inspect all cables for wear or damage and proper tension. When inspecting cables, run you
fingers on the cable, paying particular attention to bends in the cable and attachment points.
! WARNING: Replace all worn cables immediately. The following conditions may
indicate a worn cable:
• A tear or crack in the cable sheath that exposes the cable. See Figure 1.
Figure 1
• A kink in the cable. See Figure 2.
Figure 2
• A curled sheath. See Figure 3.
Figure 3
• "Necking", a stretched cable sheath. See Figure 4.
Figure 4
Cybex VR Owner's Manual
Maintenance
Page 5-3