Osd On/Off Covert - Digimerge DHU500 SERIES Installation Manual

SECTION 4
OSD ON/OFF
Turns the information display/camera
names, hard drive usage, date and time)
ON/OFF.
1. OSD: Turns the ON SCREEN DISPLAY to ON/OFF. To change the setting, press the
buttons to highlight, and press the
2. SAVE & EXIT: Saves any changes made, and exits to the Main Menu. Press the
to highlight, and press the SEL button to accept the changes.
Set Display Sequence (8/16 CH Only)
Display Settings for Single or Quad display of the cameras (in Sequence Mode).
Set Display Sequence
NOTE: The number of cameras displayed on submenus will change based on the Model of DVR:
4, 8 or 16 Cameras are available.
Revision 1.0
OSD ON/OFF
←→
buttons to switch between ON/OFF.
Full Display Sequence
Quad Display Sequence
Start Full Display Seq.
Start Quad Display Seq
Display Set
OSD: ON
Save & Exit
and
and buttons
Page: 1
Camera 1:
10 SEC
Camera 2: BYPASS
Camera 3:
BYPASS
Camera 4:
BYPASS
Camera 5: BYPASS
Camera 6:
BYPASS
Camera 7: BYPASS
Camera 8:
BYPASS
Save & Exit
Page 1 SEQ: BYPASS
Page 2 SEQ: BYPASS
Save & Exit
25