Changing Viewing Modes - Lorex LH158 Instruction Manual

Using the PC/Mac Client Software
• : Click to close all connected channels. Note that the system continues to record when
you close channels remotely.
• : Previous page.
• : Next page.
• : Click to open the selected channel in full screen view.
• : Click to select the desired split-screen viewing options.
5 Split screen viewing: Click the desired viewing mode.
6 Mute: Click to mute audio.
7 PTZ Controls: PTZ (Pan, Tilt, Zoom) control for connected PTZ cameras (not included).
8 Connection Status: Shows the type of connection used.
• P2P (peer-to-peer) indicates that the video is streaming directly from the DVR to the computer
running the Client Software.
• RLY (relay) indicates that the video is streaming through a Lorex video server. While relay
mode is activated, the system will disconnect after 10 minutes of inactivity. Relay mode is only
used when a direct connection cannot be made between the DVR and computer.

Changing Viewing Modes

You can change the number of channels that the system displays simultaneously (i.e.
Split-screen Mode, Single-channel Mode, etc.).
To change the DVR's viewing mode:
• Click one of the following:
• If the controls are not shown, click
62
.
.