Lorex LH158 Instruction Manual page 59

Second available for recording on
16-channel models.
NOTE: If you change this setting, the DVR
will restart when you save changes.
Under Mode, select D1 or 960H
Recording
Resolution
Frames per Second
3 Under the Quality drop-down menu, select
from Good, Better, or Best to adjust the
quality of recordings on each channel.
4 Under the Resolution drop-down menu,
select the Recording Resolution for each
channel:
• If D1 is selected, available options are CIF
(320x240), HD1 (720x240), or D1 (720x480).
• If 960H mode is selected, available options
are 480x240, 960x240, or 960x480.
5 Under the FPS drop-down menu, select
the number of frames per second you want
the DVR to record on each channel.
Recording quality
6 (Optional) Use the Copy and Copy To
drop-down menus to copy recording
settings to one or all channels. Click Copy
to copy recording settings.
7 Click Apply to save your settings.
NOTE: On the 16-channel model, increasing
the resolution or quality settings will
decrease the amount of Frames per
Second (FPS) the DVR can record. If
you receive an error message when
saving your changes, reduce the
Resolution, Quality, or FPS and try
again.
Using the Main Menu
43