Using A Ntp Server To Set Your System Time - Lorex LH158 Instruction Manual

Using a NTP Server to set your System Time

A NTP (Network Time Protocol) server syncs your system time with an online time server.
Lorex provides a free NTP service that allows your DVR to automatically update the time
for Daylight Savings Time.
NOTE: A constant Internet connection is required to use the NTP feature.
To enable NTP:
1 Right-click to open the Menu Bar and click the Main Menu button (
2 Click System. Beside NTP, click Setup.
3 Configure the following:
• Enable: Select Enable.
• Server Address: Select ntp.lorexddns.net (recommended) as the time server or select
another time server.
• Time Zone: Select your region's time zone.
4 Click Update Now to connect to the time server.
5 Click Apply to save your settings.
Setting the Date and Time
NTP Setup
Select Enable
Select ntp.lorexddns.net
Select your Time Zone
Click Update Now to connect
to the server
Click Apply to save your settings
).
23