Connecting Bnc Cameras To Your Dvr; Connecting And Removing Bnc Cables - Lorex LH158 Instruction Manual

Basic Setup

Connecting BNC Cameras to your DVR

1 Connect the male power connector on the BNC extension cable to the female power
connector on the camera.
• Connect the BNC connector to the camera.
2 Connect the female power connector on the BNC extension cable to the power adapter.
3 Connect the BNC connector to one of the Video Input ports on the rear panel of the DVR.
4 Plug the camera power adapter to a power outlet.
Male power connector

Connecting and Removing BNC Cables

BNC (Bayonet Nut Connector) is a special connector that locks on to the system port and
cannot be accidently removed.
To connect or remove a BNC connector:
• Push the BNC connector firmly into the BNC port and simultaneously twist the connector
clockwise to tighten.
• To remove a BNC connector from a BNC port, push and simultaneously twist the connector
counter-clockwise to loosen the BNC connector.
12
BNC Extension cable
BNC
Digital Video Recorder
(8-channel model shown)
Female power connector