Step 3 Of 3: Connect To The Dvr Over The Internet - Lorex LH158 Instruction Manual

Step 3 of 3: Connect to the DVR Over the Internet

Follow the steps below to connect to the DVR over the Internet using a PC or Mac.
NOTE: Make sure to upgrade your DVR to the latest firmware version. You must have the latest
DVR firmware and client software to connect to the DVR over the Internet.
PC
1 Insert the software CD that comes included with the system. Open the CD and click DVR
Software>Lorex Client Software - PC. Follow the on-screen instructions to install.
• OR, download the Client Software for PC from www.lorextechnology.com.
2 Once installation is finished, double-click the Lorex Stratus Client 1 icon (
desktop. The DVR login screen appears.
3 Under Login Type, select Device ID.
4 Under Device ID, enter the DVR's Device ID. Press PTZ/
Device ID.
5 Under User Name, enter the DVR's user name (default: admin).
6 Under Password, enter the DVR's password (default: 000000).
7 Under Client Port, enter the DVR's Client Port (default: 9000).
8 Click Login.
• If this is the first time connecting to your system, you will be prompted to change the password.
Enter the new password and click OK.
• Enter the new password in the login screen and click Login to connect to the DVR.
The Client Software connects to your DVR and streams live video from your cameras.
Connecting to Your DVR Over the Internet on PC or Mac
Select Device ID
Enter Device ID
Enter User Name (default: admin)
Enter Password (default: 000000)
Enter Client Port (default: 9000)
Click Login
on the front panel to find the
Enter the new password
and click OK
) from the
59