Adjusting Viewing Modes; Understanding The Camera List; Understanding The Audio List - Lorex QLR464 Instruction Manual

Vista Pro 6 Server: Viewing Mode

ADJUSTING VIEWING MODES

To change how the live video feed displays in the window:
• Click the
1-channel view button
• While in 1-Channel view, press the
• To change the Auto Sequence dwell time, click the
Dwell Time, enter desired dwell time in seconds (1~20 seconds)

Understanding The Camera List

The Camera List allows you to have a "bird's eye view" of the current status of the channels.
Figure 4.1 Camera List.
• A Blue button indicates the channel is active.
• A Red button indicates the channel is offline.
• A Gray button indicates the channel is not in use.

Understanding The Audio List

To listen to audio during live viewing, click the Live Audio Button. Then click on the channel with
the audio input. This allows you to listen to audio that the camera receives.
Figure 4.2 Listening for Live Audio.
For details on how to set up audio on audio-enabled cameras (not included), see "Audio Tab" on
page 33.
12
( ),
4-channel view button
button (
Auto Sequence
Setup
Live Audio button
( ) or
Full Screen button
) to cycle through channels 1~4.
button ( ). Under Auto Sequence
( ).