Using A Ntp Server To Set Your System Time - Lorex LH160 ECO6 SERIES Instruction Manual

10 Setting the Date and Time
To enable automatic DST adjustments:
1. Click the DST Setup button.
2. Configure the following:
• Daylight Saving Time: Select Enable.
• Time Offset: Select the number of hours the system should move forward or backward when DST
occurs.
• Daylight Saving Time Mode: Select Week or Date. This allows you to select whether DST should
begin and end at the beginning of the week or on a specific date.
• Start Time, End Time: Enter when DST starts and ends.
3. Click Apply to save your settings.

10.2 Using a NTP Server to set your System Time

A NTP (Network Time Protocol) server syncs your system time with an online time server.
Lorex provides a free NTP service that allows your DVR to automatically update the time
for Daylight Savings Time.
Note
A constant Internet connection is required to use the NTP feature.
To enable NTP:
1. Right-click to open the Menu Bar and click the Main Menu button (
#LX400007; r. 1.0/12121/12123; en-US
).
24