Brother HL-4140CN User Manual page 45

Chapter 2
e
Open the back cover (Face-up output
tray).
16
f
Pull down the two grey levers, one on
the left-hand side and one on the right-
hand side, to the envelope position as
shown in the illustration below.
1
g
Close the back cover.
h
Send the print data to the machine.
i
When you have finished printing, open
the back cover and reset the two grey
levers which were pulled down in
step f back to their original positions.
Note
• Remove each printed envelope
immediately to prevent a paper jam.
• If your thick paper curls during printing, put
only one sheet at a time in the MP tray and
open the back cover (face-up output tray)
to let the printed pages exit to the face-up
output tray.