How To Scan To A Computer; Scanning A Document; Scanning Using The Scan Key - Brother HL-4140CN User Manual

11

How to scan to a computer

Scanning a document

There are several ways to scan documents.
You can use the
machine or the scanner drivers on your
computer.
a
To use the machine as a scanner, install
a scanner driver. If the machine is on a
Network, configure it with a TCP/IP
address.
 Install the scanner drivers on the
Installation CD-ROM. (See the Quick
Setup Guide and Scanning in the
Software User's Guide.)
 Configure the machine with a TCP/IP
address if network scanning does not
work. (See Configuring Network
Scanning in the Software User's
Guide.)
b
Load your document. (See How to load
documents on page 26.)
 Use the ADF to scan multiple pages
of documents. The ADF feeds each
sheet automatically.
 Use the scanner glass to scan a
page of a book or one sheet at a
time.
c
Do one of the following:
 To scan using the
key, go to Scanning using the scan
key on page 56.
 To scan using a scanner driver at
your computer, go to Scanning using
a scanner driver on page 57.
56
11
(SCAN) key on the
(SCAN)
Scanning using the
scan key
For more information, see Using the Scan
key in the Software User's Guide.
a
Press the (SCAN) key.
b
Choose the scan mode you want.
Scan to:

USB

Network

FTP
 E-mail (Server)

E-mail

Image
1

OCR

File
1
(Macintosh users)
Presto! PageManager must be downloaded
and installed before use. See Accessing
Brother Support (Macintosh) on page 4 for
further instructions.
c
(For network users)
Choose the computer you want to send
the data to.
d
Press Mono Start or Colour Start to
begin scanning.
11
11