Additional Sending Operations; Sending A Fax Manually; Dual Access (Black & White Only); Manual Transmission - Brother HL-4140CN User Manual

Additional sending
operations

Sending a fax manually

Manual transmission

Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
a
Make sure you are in Fax mode
(FAX).
b
Load your document.
c
Pick up the handset of an external
telephone and listen for a dial tone.
d
Dial the fax number you want to call.
e
When you hear the fax tones, press
Mono Start or Colour Start.
 If you are using the scanner glass,
press Send.
f
Replace the handset of an external
telephone.
Dual access
(black & white only)
3
You can dial a number, and start scanning the
fax into memory—even when the machine is
3
sending from memory, receiving faxes or
printing PC data. The LCD will show the new
job number.
3
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Note
If you get an Out of Memory message
while scanning the first page of a fax,
press Stop/Exit to cancel scanning. If you
get an Out of Memory message while
scanning a subsequent page, you can
press Mono Start to send the pages
scanned so far, or press Stop/Exit to
cancel the operation.
Sending a fax
3
3
17