Pattern - CBC PT110N User Manual

Pattern

Function
S et Pa tter n
Run Pattern
Delete Pattern
Speed Dome Camera Instruction Manual
Pattern Function allows the camera to memorize a path (often a curved path) created
by controller joystick for an assigned time. The camera will then retrace the path
exactly as memorized.
4 Patterns are available and Maximum 1200 communication commands can be stored
in a pattern.
Patterns can be created by one of following two methods.
Method 1) <Set Pattern> [Pattern NO.]
Pattern editing screen is displayed as bellow.
Movement by Jo ystick and preset movement can be memo
The re maining memor
To sav e the reco rding, press NEAR key and to cancel,
Method 2) OSD Using OSD
Method 1) <Run Pattern> [Pattern NO.]
Method 2) <Go P reset> [ Pattern NO.+130]
Use OSD menu to delete a P
OPERATION
EDIT PATTERN 1
[NEAR:SAVE /FAR:DELETE]
0/0/x1/N
y size is displayed in progr
Menu: See the section "How to use OSD Menu".
ex) Run Pattern 2 : <Run Pattern> [2]
ex) Run Pattern 2
attern.
3
rized in a pattern.
ess bar.
press FAR key.
: <Go Preset> [132]
20