CBC PT110N User Manual page 15

Vid o o nection e C n
Connect with
Alarm Input Connection
Sensor Input
Before connecting sensors, check the sensor driver voltage and output signal type. Since sensor output
signal types are divided into Open Collector and Voltage Output types in general, the cabling must be
in stalled properly depending on the signal type.
Signal
IN COM+
IN1−, IN2−, IN3−, IN4−
Speed Dome Camera Instruction Manual
BNC coaxial c able.
Internal
Connect (+) cable of electric power source for Sensors to this port as
shown in the circuit above.
Connect output of sensors for each port as shown in the circuit above.
INSTALLATION
SENSOR IN1
SENSOR COM
(GND)
SENSOR IN2
SENSOR COM
(GND)
SENSOR IN3
SENSOR COM
(GND)
SENSOR IN4
SENSOR COM
(GND)
Description
2
15