Parts Name & Functions - CBC PT110N User Manual

Parts Name & Functions
Main Unit / Surface Mount Bracket
Dome Cover
Surface Mount Bracket
Gasket (PT110N-XT
model only)
Lockup Screw
Cabling Terminal Block
DIP Switch
Fall-proof spring
Speed Dome Camera Instruction Manual
Mount Adapter
Cabling Terminal Block
Safety Retention Spring
Main Body
Gasket (PT110N-
XT Model only)
Lock-up Screw
DIP Switch
Dome Cover
Do not remove protecti
installation processes to protect dome cover from scratches or dust.
The surface mount bracke
or wall mount bracket. Separate the cover first and then attach it
directly to ceiling. Camera must be assembled at the last stage.
Protect it from dust and rainstorm. Move projecting part of the gasket
which should be placed on the low to main body position
Fixes main unit to surface mount bracket.
During installation, Power, Video, Communication, Alarm Input cables
are connected on to this cabling terminal block.
Pull out from Surface Mount Bracket and connect to Main Body hook.
Adjusts camera ID and protocols.
After installing fall-proof spring on Bracket , hang on the safety ring to
protect the camera from falling
INTRODUCTION
Back of Main Unit
ve vinyl from dome cover before finishing al
t is used for installing either a ceiling mount
1
l
7