Table of Contents
Advertisement
2-5-8 Setup procedure for 'WISP':
If the network service provided by your service provider is through a
wireless network, select this mode. After you have connected the router
to the access point of the service provider wirelessly, set up the WAN
connection type in the WAN page.
Here are descriptions of every setup item:
Disable/Enable/
staEnable (1):
1
There are three selections for
wireless ISP functions.
Disable: disables this function.
Enable: enables this function and the router can
connect to the access points installed by your
wireless service provider. Any clients associated
with the router can access the Internet service
through the wireless network.
66
2
3
4
5
Advertisement
Table of Contents
