Setup Procedure For 'L2Tp Xdsl - Comtrend Corporation Wireless-N Broadband Router User Manual

2-3-5 Setup procedure for 'L2TP xDSL':

L2TP is another popular connection method for xDSL and other Internet
connection types, and all required setting items are the same as a PPTP
connection.
Like PPTP, there are two kinds of required settings, we'll start from
'WAN Interface Settings':
Select how you obtain IP address from your service provider. You can
choose 'Obtain an IP address automatically' (equal to DHCP, refer to the
'Cable Modem' section above), or 'Use the following IP address' (equal
to static IP address, refer to the 'PPPoE xDSL' section above).
WAN interface settings must be correctly set, or the Internet connection
will fail even thought the PPTP settings are correct. Contact your
Internet service provider if you don't know how to fill in these fields.
Now go to L2TP settings section:
39