Comtrend Corporation Wireless-N Broadband Router User Manual page 67

staEnable:
SSID (2):
Site Survey (3):
Security Settings (4): If the access point enables wireless security, you
After you complete all settings, click the 'Apply' (5) button and the
following will be displayed on your web browser:
Note: In this mode, if you are informed by your
wireless ISP that the wireless settings of the
access point have changed, configure the router in
this page to match the settings.
Enable this function and the router can only allow
connection through wired Ethernet cable for WAN
access service.
This is the name of the wireless network. Input the
SSID name that your ISP provided to you.
Click the 'Select Site Survey' button, then a
"Wireless Site Survey Table" will pop up. It will list
all available access points nearby. Select the access
point designated by your wireless ISP in the table
and the router will join the wireless network
through this access point.
have to follow the same settings in order to access
the access point. Click to set security settings for
this connection (go to section '2-7-3 Wireless
Security' for detailed instructions).
67