Comtrend Corporation Wireless-N Broadband Router User Manual page 127

Virtual Server
Table (10):
Delete (11):
Delete All (12):
Reset (13):
After you complete all settings, click the 'Apply' (14) button and the
following will be displayed on your web browser:
Click the 'Continue' button to go back to the previous setup menu; to
continue on other setup procedures, or click the 'Apply' button to
reboot the router so the settings will take effect (wait for about 60
seconds while the router is rebooting).
If you want to reset all settings in this page back to previously-saved
value, click the 'Cancel' button.
All existing virtual server mappings will be
displayed here.
Select a virtual server mapping by clicking
the 'Select' box of the mapping, then click the
'Delete' button to remove the mapping. If there's
no existing mapping, this button will be grayed out.
Delete all mappings existing in the virtual server
table.
Unselect all mappings.
127