Table of Contents
Advertisement
Traffic Type (g):
Protocol (h):
After you complete all settings, click the 'save' button (i), you'll be
brought back to previous menu, and the rule you just set will appear in
the current QoS table; if you did anything wrong, you'll get an error
message when you click the 'Save' button, correct your input by the
instructions given by the error message.
If you want to erase all the values you just inputted. Click the 'Reset'
button.
Select the traffic type of this rule, available options
are None, SMTP, HTTP, POP3, and FTP. You can
select a specific traffic type for this rule, if you want
to make this rule as an IP address based rule (apply
the limitation on all traffics from / to the specified
IP address / port number), select 'None'.
Select the protocol type of this rule, available
options are TCP and UDP. If you don't know what
protocol your application uses, try 'TCP' first, and
switch to 'UDP' if this rule doesn't seem to work.
119
Advertisement
Table of Contents
