Accessing The Systems Insight Display - HP DL585 - ProLiant - G2 User Manual

CAUTION:
Operating the server in this manner results in improper airflow and improper cooling that can
lead to thermal damage.
IMPORTANT:
page 16), leave the server powered on. The Systems Insight Display LEDs are cleared when
the server is powered off.
Extend the server from the rack
1.
If the locking latch is locked, use a T-15 Torx screwdriver to unlock the latch.
2.
NOTE:
panel
Lift up on the hood latch, and remove the access panel.
3.
After installing hardware options, replace the access panel. Be sure that the panel is securely locked
4.
into place before powering up the server.

Accessing the Systems Insight Display

IMPORTANT:
page 16), leave the server powered on. The Systems Insight Display LEDs are cleared when
the server is powered off.
Extend the server from the rack
1.
Remove the access panel
2.
Locate the Systems Insight Display
3.
Do not operate the server for long periods with the access panel open or removed.
When removing the access panel to view the Systems Insight Display LEDs (on
("Extending the server from the
The T-15 Torx screwdriver is shipped with the server and can be located on the rear
("Rear panel components" on page 11).
When removing the access panel to view the Systems Insight Display LEDs (on
("Extending the server from the
("Removing the access
("Media board
rack" on page 27).
rack" on page 27).
panel" on page 28).
components" on page 14).
Operations 29