Device Drivers - LG CED-8080B Owner's Manual

The Setup
Process
List of Files
to be
Installed
In Your
PC
13

Device Drivers

When using Windows 98/95 or Window NT Workstation Ver.4.0, no
special device driver is required.
This CD-R/RW drive is supplied with MS-DOS drivers on a 3
disk. These drivers are required to use the CD-R/RW drive in DOS
or to enable the CD-ROM disk. Drivers for other Operating Systems
are not normally required or available as they usually have a generic
IDE, E-IDE/ATAPI CD-ROM driver built in (Windows 95, 98, NT 3.51
and higher and OS/2 Warp 3 are such examples).
If it is necessary to edit any file manually, first make a backup copy
on a floppy, then the original file, then save the changed file to your
hard drive, exit and re-boot PC to ensure the change will be
implemented.
For non-Windows 95/98/NT and OS/2 Warp 3
Installation
The INSTALL program performs the following functions:
• Allows the user to select the target drive and directory in DOS.
• Unless modified by the user, the INSTALL program searches the
target drive for the directory (\CDROM): if this is not found, the
directory will be created.
• Copies the CD-R/RW device driver file named GSCDROM.SYS,
the Microsoft CD-ROM Extension file named MSCDEX.EXE and
the utility files to the specified directory.
• Modifies your CONFIG.SYS file to list the location and name of
the device driver.
• Modifies your AUTOEXEC.BAT file to load MSCDEX
MSCDEX.EXE
GSCDROM.SYS
EJECT.EXE
CLOSE.EXE
Microsoft MS-DOS CD-R/RW Extension software,
which enables the computer to access the CD-R/RW
drive.
CD-R/RW device driver.
Software eject program which can eject the CD
tray.
Software close program which can close the CD
tray.
" floppy
1
2