Table of Contents
Advertisement
All manuals and user guides at all-guides.com
DirectCD
TM
v2.5b(s)
Device Drivers
When using Windows 95/98/2000/ME/XP or Window NT
Workstation Ver. 4.0, no special device driver is required.
Your system, upon Power On and bootup after installing and
connecting the new CD-RW drive, will recognize and load native
software drivers automatically.
The DOS and Windows 3.1 users can download the DOS Device
drivers anytime via internet.
For your information, please consult the following internet sites:
For
I In order to ensure normal drive operation, please check the
Windows
95/98/2000/
ME/XP
Users
I If the drive is not recognized by your computer, please check the
I Run Add New Hardware in Control Panel to let PC search again
I In order to ensure normal drive operation, please check to see if
For
Windows
NT
I If the drive is not recognized by your computer, an
Workstation
Ver.4.0 Users
11
http://www.lge.com
http://www.lgeservice.com/drivers.html
following:
• The drive is displayed in
Windows 95/98/ME : [Control Panel]-[System]-[Device
Manager]-[CD-ROM]
Windows 2000/XP : [Control Panel]-[System]-[Hardware]-
[Device Manager]-[DVD/CD-ROM-Drive]
• 32-bit is displayed in
[Control Panel]-[System]-[Performance]
following items.
• If an
indicator is displayed on the IDE controller in [Control
Panel]-[System]-[Devices Manager]-[Hard Disk Controller],
you will need to contact your PC's manufacturer or the
motherboard's manufacturer and get the appropriate IDE
controller driver.
for new device.
the drive is displayed on the IDE controller in [Control Panel]-
[SCSI Adapter]-[Devices]
is displayed on the IDE controller in [Control Panel]-[SCSI
Adapter]-[Devices], you will need to contact your PC's manufacturer
or the motherboard's manufacturer and get the appropriate IDE
controller driver.
indicator
Advertisement
Table of Contents
