Table of Contents
Advertisement
Running
the Install
Program
(MS-DOS
Installation)
For
Windows
98/95 Users
For
Windows
NT
Workstation
Ver.4.0 Users
14
1. Insert the diskette into the appropriate drive.
2. Go to the floppy drive by typing A: or B: at the DOS prompt, as
appropriate.
3. Type the word INSTALL and press [ENTER].
4. The INSTALL program will begin loading. When loading is
complete, the INSTALL program identification will appear on
screen.
5. Follow the instructions on screen.
6. When installation is complete, remove the diskette and reboot
your PC.
I In order to ensure normal drive operation, please check the
following:
• The drive is displayed in
[Control Panels]-[System]-[Device Manager]-[CD-ROM]
• 32-bit is displayed in
[Control Panels]-[System]-[Performance]
I If the drive is not recognized by your computer, please check the
following items.
• If a
indicator is displayed on the IDE controller in [Control
Panels]-[System]-[Devices Manager]-[Hard Disk Controller],
you will need to contact your PC's manufacturer or the
motherboard's manufacturer and get the appropriate IDE
controller driver.
I Run Add New Hardware in Control Panel to let PC search
again for new device.
I In order to ensure normal drive operation, please check to see if
the drive is displayed on the IDE controller in [Control Panels]-
[SCSI Adapter]-[Devices]
I If the drive is not recognized by your computer, a
displayed on the IDE controller in [Control Panels]-[SCSI
Adapter]-[Devices], you will need to contact your PC's manufacturer
or the motherboard's manufacturer and get the appropriate IDE
controller driver.
indicator is
Hide quick links:
Advertisement
Table of Contents
