FS-8700-60 Gardner Denver Manual
4.1.2.
Column
Title
Node_Name
Gar_cmd
Gar_data
4.1.3.
Column Title
Scan_Interval
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com
Driver Related Map Descriptor Parameters
Function
Name of Node to fetch data
from
Data poll commands
Data fields in a data poll
command response
message. Can be used to
poll for all or specific data
or just isolate specific items
in a "All" poll.
Timing Parameters
Rate at which data is polled. Note that the
Poll_Delay Connection parameter affects the
effective scan interval.
Legal Values
One of the node names specified
in "Client Node Descriptor" above
Service_Data, Operating_Mode,
Operating_Data
Available with Service_Data: All,
Advisories, Shutdown_codes,
Hourmeter_shutdown,
Hourmeter_total,
Hourmeter_loaded,
Hourmeter_temp,
Hourmeter_tmp_st, Last_maint_A,
Last_maint_B, Oilage
Available with Operating_Mode:
All, Oper_mode, Seq_number,
Oper_state
Available with Operating_Data: All,
System_pressure, Filter_pressure,
Discharge_temp, Reservoir_temp,
Motor_current
Function
Page 7 of 11
Legal
Values
≥0.1s