Client Side Map Descriptors; Fieldserver Specific Map Descriptor Parameters; Driver Specific Map Descriptor Parameters - FieldServer FS-8704-12 GE-EGD Manual

FS-8704-12_GE-EGD Manual
4.4.

Client Side Map Descriptors

4.4.1.
Column Title
Map_Descriptor_Name
Data_Array_Name
Data_Array_Location
Function
4.4.2.
Column Title
Node_Name
Length
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com

FieldServer Specific Map Descriptor Parameters

Function
Name of this Map
Descriptor
Name of Data Array
where data is to be
stored in the
FieldServer
Starting location in
Data Array
Function of Client
Map Descriptor

Driver Specific Map Descriptor Parameters

Function
Name of Node to fetch data from
Number of points being consumed for Bit
values this represents the number of bytes
(i.e. number of points divided by 8)
Legal Values
Up to 32 alphanumeric characters.
The Map Descriptor name can be any
name that has meaning to you and
need not be unique.
This driver recognizes a special Map
Descriptor name; "EGD-ii". It stands for
EGD Internal Indications. Its use is
more fully explained in Appendix B.1 of
this manual.
One of the Data Array names from
"Data Array" section above
0 to maximum specified in "Data Array"
section above
Passive
Legal Values
One of the node
names specified in
"Client Node
Descriptor" above
1 - 1000
Page 8 of 26