Wireless Client Mode - D-Link DAP-1360 User Manual

Section 3 - Configuration

Wireless Client Mode

This Wizard is designed to assist you in configuring your DAP-1360 as a wireless client.
Select Wireless Client from the drop-down menu.
Select WPS as the configuration method only if your
wireless device supports Wi-Fi Protected Setup (WPS).
For Manual setup, skip to the next page.
Click Next to continue.
On the device you want to connect to, start the PBC
process on the device. You will have 2 minutes to start
the PBC process on both devices.
D-Link DAP-1360 User Manual 30