Port Forwarding (Wisp Modes Only) - D-Link DAP-1360 User Manual

Section 3 - Configuration
This function is available if your DAP-1360 is in the WISP Client Router or WISP Repeater mode. This feature allows you to open
a single port or a range of ports. Click Save Settings and the port forwarding rule will be put into the Port Forwarding List.
Port Forwarding
Check the box to configure a port forwarding rule.
Rules:
Name:
Enter a name for the rule. You can select an
application name from the Application Name drop-
down menu. Click the << button to fill in the Name
field with the application name that you selected.
IP Address:
Enter the IP address of the computer on your local
network that you want to allow the incoming
service to.
Start/End Ports: Enter the port or ports that you want to open. If
you want to open one port, enter the same port in
both boxes.
Traffic Type: Select TCP, UDP, or Both.
D-Link DAP-1360 User Manual

Port Forwarding (WISP modes only)

52