Configure Wpa-Psk - D-Link DAP-1360 User Manual

Section 5 - Connecting to a Wireless Network

Configure WPA-PSK

It is recommended to enable WEP on your wireless bridge or access point before configuring your wireless adapter. If you are
joining an existing network, you will need to know the WEP key being used.
Click on a network (displayed using the SSID) using WPA-PSK under
Select a network to connect to and then click the Connect button.
Enter the appropriate security key or passphrase in the field
provided and then click the Connect button.
D-Link DAP-1360 User Manual 79