Wisp Client Router Mode; Wisp Client Router Mode - D-Link DAP-1360 User Manual

Section 2 - Installation
In the WISP Client Router mode, the DAP-1360 wirelessly connects to a WISP (Wireless Internet Service Provider) AP. In this
mode, the DAP-1360 also acts as a router for wired clients on your LAN and provides NAT (Network Address Translation) and
a DHCP server to generate IP addresses for wired clients only. NAT and the DHCP server allow many computers to share the
same wireless Internet connection.
If you are a WISP subscriber and want to access your WISP account using wired computers, connect your computers to the
DAP-1360 to get NAT, and then connect them to the WISP AP.
Internet
D-Link DAP-1360 User Manual

WISP Client Router Mode

WISP Outdoor AP
Connecting Wired PCs to the Internet Using the DAP-1360
Computer
DAP-1360
(In WISP Client Mode)
18