Bridge With Ap Mode; Bridge With Ap Mode - D-Link DAP-1360 User Manual

Section 2 - Installation
The Bridge with AP mode is the same as the Bridge mode, but in this case, the DAP-1360 also acts as an AP. Clients with wireless
interfaces can wirelessly connect to the DAP-1360 and then connect to the other LAN that the DAP-1360 bridges to.
Note: The Bridge with AP mode is not specified in the Wi-Fi or IEEE standards. This mode will only work using two DAP-1360 units.
Communication with other APs (even other D-Link APs) is not guaranteed.
Computer
D-Link DAP-1360 User Manual

Bridge with AP Mode

LAN 1
Computer
DAP-1360
(In Bridge Mode with AP Mode)
Connecting Two Separate LANs Together Through Two DAP-1360 Units
(Wireless PCs Can Access the DAP-1360 Units)
LAN 2
Computer
DAP-1360
(In Bridge Mode with AP Mode)
Computer
17