Port Filter (Wisp Modes Only) - D-Link DAP-1360 User Manual

Section 3 - Configuration
This function is available if your DAP-1360 is in the WISP Client Router or WISP Repeater mode. This feature is used to secure
or restrict your local network. It will deny the ports that you enter from the local network to the Internet. Click Save Settings
and the port filter rule will be put into the Port Filter List.
Port Filter
Check the box to configure a port filter rule.
Rules:
Name:
Enter a name for the rule. You can select an
application name from the Application Name drop-
down menu. Click the << button to fill in the Name
field with the application name that you selected.
Start/End Ports:
Enter the port or ports that you want to open. If
you want to open one port, enter the same port in
both boxes.
Traffic Type: Select TCP, UDP, or Both.
D-Link DAP-1360 User Manual

Port Filter (WISP modes only)

53