Controls And Functions; Front Panel - Yamaha PJP-EC200 User Manual

Front panel

1
LEDs
Light to indicate the status of this unit.
■Functions of the LEDs
INPUT LEVEL (IN1/IN2 /CONFERENCE)
On (green): Detecting audio data.
On (red): Audio is distorted because the input level is too
high.
Off: No audio data has been detected.
Note
If this LED lights up in red, adjust the input gain for MIC/LINE
INPUT using the GAIN controls on the rear panel of this unit
until it turns off.
PHANTOM
On: The phantom power supply is on.
Off: The phantom power supply is off.
Blinks: The setting is not reflected.
y
If the setting is not reflected, refer to "Q1: LEDs are off or
blinking" (page 51).
8

Controls and Functions

INPUT LEVEL
MIC/LINE IN1 IN2 CONFERENCE
2
The following information is shown.
• MODEL No.: Model number of this unit
• SER.: Serial number for use in management/distinction
GAIN KNOB
On: The MIC/LINE INPUT gain setting on this unit is
Off: The MIC/LINE INPUT gain setting on the web menu
Blinks: The setting is not reflected.
y
If the setting is not reflected, refer to "Q1: LEDs are off or
blinking" (page 51).
DIP SW
On: The DIP switch settings are prioritized.
Off: The web menu settings are prioritized.
Blinks: The setting is not reflected.
y
If the setting is not reflected, refer to "Q1: LEDs are off or
blinking" (page 51).
POWER
On: The power of this unit is on.
Off: The power of this unit is off.
CONFERENCE ECHO CANCELLER
ACTIVE
PHANTOM GAIN KNOB
Label
of this unit
working.
is working.
PJP-EC200
POWER
DIP SW