Adjusting The Input Gain Automatically (Auto Gain Controller) - Yamaha PJP-EC200 User Manual

Adjusting the Input Gain Automatically (Auto Gain Controller)

If you are using a boundary microphone, the volume level of sounds picked up by the microphone varies depending on
the distance between the microphone and talker. By configuring the auto gain controller settings, this unit automatically
optimizes the pickup gain according to the volume level of pickup sounds. You can configure the settings for MIC/LINE
IN1 and IN2 individually.
1
Click "Sound Settings".
The "Sound Settings" screen appears.
2
In the "Auto Gain Controller" field, click
"Edit".
The "Auto Gain Controller Settings" screen appears.
3
Configure the auto gain controller
settings.
Use: Select whether to use the auto gain controller. To
use the auto gain controller, select "Enable".
Level: Select an auto gain control level from "6dB",
"10dB" and "20dB". To widen the sound pickup area,
select "20dB". To narrow the sound pick area, select
"6dB".
28
4
Click "Apply".
The confirmation screen appears.
5
Click "Close".
The "Sound Settings" screen appears again.