Using In Combination With A Pa System - Yamaha PJP-EC200 User Manual

Using in combination with a PA system

By combining this unit with a PA system, it makes possible to use many microphones for a conference.
3
AUTO ETHER
ANALYZER
15
INITIALIZE
PHANTOM
DIP SW
ACTIVE ACTIVE
9
5
4
1
Connect MIC/LINE INPUT IN1 of this unit
to the audio output jack of your PA
system.
2
Connect microphones to your PA
system.
3
Connect speakers with built-in amplifier
to LINE OUTPUT.
4
Connect CONFERENCE IN of this unit to
the audio output jack of your PC or
videoconference system.
5
Connect CONFERENCE OUT of this unit
to the audio input jack of your PC or
videoconference system.
6
Connect the AC adapter to DC IN.
LINE OUTPUT CONFERENCE MIC/LINE INPUT
IN2
R L OUT IN GAIN
MIN MAX MIN MAX
IN2 IN1
14
13
1
11
STANDBY ON
IN1
DC IN 12V
6
7
7
Connect the power cable to the AC
adapter.
8
Connect the power cable to an AC outlet.
9
Configure the settings of this unit using
the DIP switch.
For details, refer to "Functions of the DIP switch"
(page 10).
10
Turn on the external devices.
11
Turn on this unit.
The POWER LED on the front panel turns on.
12
On your PC or videoconference system,
adjust the output level.
Adjust the output level so that the INPUT LEVEL
LED on the front panel does not turn on in red.
2
8
13