Setting The Date And Time Automatically - Yamaha PJP-EC200 User Manual

If your area uses DST (Daylight Saving Time)
Select "Adjust clock for daylight saving changes" and then
configure the DST setting.
Adjust automatically: Adjust DST automatically
according to the time zone.
Note
To adjust DST automatically, this unit must be connected to the
Internet.
Specify by date and time: Specify the period of DST in
month, day and time.
Specify by day of the week: Specify the period of DST in
month, week number, day of the week and time.
5
Click "Apply".
The confirmation screen appears.
6
Click "Close".
The "System Settings" screen appears again.
Setting the date and time
automatically
You can set the date and time of this unit automatically by
using an NTP server via the Internet.
Notes
• To use an NTP server, this unit must be connected to the
Internet.
• You may not be able to use an NTP server due to the security
settings of your LAN. In this case, you need to change the
settings of your router to connect to an external NTP server. For
details, refer to the owner's manual supplied with your router.
1
In the "Timezone" field, select the time
zone of your area.
2
In the "NTP Server" field, select
"Automatically synchronize with NTP
server" and then enter an NTP server
address.
19