Configuring The Network Settings; Specifying An Ip Address Of This Unit's Lan Port - Yamaha PJP-EC200 User Manual

1. Specifying an IP address of this
unit's LAN port
According to the LAN environment where this unit is
used, configure the IP address netmask settings of this
unit.
y
"192.168.100.101/24" is assigned to the LAN port by
default. If you want to change the IP address, use an IP
address which is not used by other external devices in the
same network.
1
Click "IP Settings".
The "IP Settings" screen appears.
2
In the "LAN Port" field, click "Edit".
The "LAN Port Settings" screen appears.
3
Enter an IP address to assign to this
unit.
4
Click "Apply".
The confirmation screen appears.

Configuring the Network Settings

5
Click on the link to access to the new IP
address and then click "Close".
The "Top Page" screen under the new IP address
appears.
21