Figure 4-28 Quality Settings; Figure 4-29 Bit Rate Settings; Table 4-9 Selecting Quality, Bit Rate, Or Frame Rate - Honeywell HD3HDIH User Manual

HD3 equIP
Document 800-07361V5 Rev A
07/2013
®
Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide
Table 4-9 Selecting Quality, Bit Rate, or Frame Rate
Select this Priority Field Setting
field setting
Quality Maximum Bit Rate
(see Selecting
The Target Bit Rate field
Quality for Priority
is grayed out.
on page 71)
Bit Rate Target Bit Rate
(see Selecting Bit
Maximum Bit Rate and
Rate for Priority on
Compression Ratio fields
page 71)
are grayed out.
Frame Rate Target Bit Rate
(see Selecting
Maximum Bit Rate and
Frame Rate for
Compression Ratio fields
Priority on page 72)
are grayed out.
Selecting Quality for Priority
When Quality is selected as the priority, you can adjust the Compression Ratio and/or the
Maximum Bit Rate.
Figure 4-28 Quality Settings
Quality is selected.
Compression Ratio
Maximum Bit Rate
Selecting Bit Rate for Priority
When Bit Rate is selected as the priority, you can adjust the Target Bit Rate.
Figure 4-29 Bit Rate Settings
Bit Rate is selected.
Target Bit Rate
.
Description
The camera maintains the picture quality
until the bit rate delivered exceeds the
Maximum Bit Rate (MBR), at which point
the camera drops frames to ensure that
the MBR is not exceeded.
The camera adjusts the picture quality to
ensure that the bit rate delivered does not
exceed the Target Bit Rate (TBR), at
which point the camera drops frames to
ensure that the TBR is not exceeded.
The camera maintains the selected frame
rate while adjusting image quality to meet
the TBR. This mode allows the actual bit
rate to fluctuate beyond the user-defined
TBR while maintaining the selected frame
rate.
Default setting is Medium. Selecting Minimum or Low will Default setting is Medium. Selecting Minimum or Low will
increase overall picture quality and increased delivered bit rate. increase overall picture quality and increased delivered bit rate.
If the maximum bit rate exceeds the current threshold, the
frame rate will drop.
Increasing or decreasing the target bit rate threshold will
increase or decrease the picture quality accordingly. If the
target bit rate is exceeded, the frame rate will drop.
71