Figure 2-6 Camera And Cables - Honeywell HD3HDIH User Manual

HD3 equIP
Document 800-07361V5 Rev A
07/2013
®
Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide
2. Connect to the power supply (see
3. Plug the power supply into an appropriate power source. The LED on the RJ45 jack
illuminates when the camera receives power. If it does not illuminate, check the
terminal block connections and the power source.
Note To ensure satisfactory performance, it is recommended that you use a UPS
source when connecting the camera to a 24 V AC power source.
Figure 2-6 Camera and Cables
Back view of camera
Figure 2-6 on
24 V AC power
page 23).
RJ45 Ethernet network
connection (using 10Base T
or 100Base TX cable). See
Connecting to a Network via
an RJ-45 Ethernet
Connector, page 24)
Also for Power over
Ethernet (PoE 802.3af)
Connector Strip
Audio: Input/Output
Alarm: Input/Output
(see Connecting
page 21)
Alarms,
23