Finding The Equip Series User Guide; Step 3: Log Onto The Ip Utility And Discover Network Devices - Honeywell HD3HDIH User Manual

Installing the Honeywell IP Utility

Finding the equIP Series User Guide

Step 3: Log Onto the IP Utility and Discover Network Devices

34
Go to Getting Started Change UAC Setting.
a.
b. Change the UAC setting to Never Notify.
c. Click OK to save the new setting.
3. Open the Honeywell IP Utility InstallShield Wizard.
Method 1: DVD
Insert the DVD into the DVD-ROM drive.
Note If InstallShield does not open automatically, navigate to [DVD
drive]\Honeywell IP Utility\Honeywell IP Utility Setup.exe. Double-click on
the file to launch the program.
Method 2: Website
a. Navigate to
http://www.honeywellsystems.com/support/download-center/index.html.
b. Follow the instructions on the page to log on, and find your camera.
Note You will need a Username and Password to log in to the Download Center. To
receive a Username and Password, contact the customer service center for
your region. Contact information is found on the Download Center page.
c. Under Honeywell IP Utility, download, extract and open the Honeywell IP Utility
Set-up.exe icon from where you extracted the file.
4. When the Honeywell IP Utility InstallShield Wizard opens, follow the instructions.
After the installation is complete, a Honeywell IP Utility icon
desktop.
Please look for the user guide on the software DVD that came with your camera.
1. Double-click the Honeywell IP Utility icon
-OR-
Click Start  Programs  Honeywell Video Systems  IP Utility  Honeywell IP
Utility.
The Honeywell IP Utility Log On window opens.
displays on the
on your desktop.