Computer Input; Computer 2(Analog)) - Eiki LC-XB43N Owner's Manual

Computer Input
Input Source Selection (RGB: Computer 1/Computer (Analog))
Direct Operation
Choose either Computer 1(RGB) or Computer  (RGB(Analog)) by pressing the INPUT button on the top
control or press the COMPUTER button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described
below.
Top Control
INPUT button
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point

Use the Point
▲▼
1 or Computer  and then press the Point
access the submenu items.
3
When Computer 1 is selected, use the Point
buttons to select RGB and then press the SELECT
button.
When Computer  is selected, use the Point
buttons to select RGB(Analog) and then press the
SELECT button.
Note:

When the Input Search function is set to On1 or On in
the Auto setup function, the input signal will be searched
automatically (p.49).
Computer1 ((RGB) /
(Component) / (Scart))
Computer (RGB(PC
digital) / RGB(AV HDCP) /
RGB(Analog))
Video
S-video
Network
buttons to select Input and
▲▼
or the SELECT button.
►
buttons to select either Computer
►
Remote Control
COMPUTER button
Input Menu
button to
▲▼
▲▼
Computer
1
Computer1 ((RGB) /
(Component) / (Scart))
Computer (RGB(PC digital) /
RGB(AV HDCP) / RGB(Analog))
VGA
31