Remote Control Operation - Eiki LC-XB43N Owner's Manual

Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons
enables you to make the desired operation quickly without calling up the On-Screen Menu.
COMPUTER/VIDEO/NETwORK button
Press the COMPUTER, VIDEO or NETWORK button on the
remote control to select the input source. See pages 31-32,
41-42 for details.
Refer to the owner's manual of "Network Set-up and
Operation" for details about the network input.
FREEZE button
Press the FREEZE button on the remote control to freeze
the picture on the screen. To cancel the Freeze function,
press the FREEZE button again or press any other button.
Fig.1 will appear on the Screen menu while the Freeze
function is working.
Fig.1
INFO . button
Display the input source information: Input, H-sync freq .,
V-sync freq ., Screen, Language, Lamp status, Lamp
counter, Power management, Key lock, PIN code lock
and Remote control (p.62).
D .ZOOM +/- buttons
Press the D.ZOOM +/- buttons on the remote control to
enter to the Digital zoom +/– mode. See page 40 for details.
LAMP button
Press the LAMP button on the remote control to select the
lamp mode for changing the brightness on the screen.
High ........... Brighter than the Normal mode.
Normal ....... Normal brightness.
Eco ............ Lower brightness reduces the lamp power
consumption and extends the lamp life.
Remote Control Operation
Remote Control
COMPUTER
button
INFO .
button
D .ZOOM+/-
buttons
LAMP
button
Note:

See the next page for the description of other
buttons.
Basic Operation
VIDEO button
NETwORK
button
FREEZE button
9