Slide Shutter; Cleaning The Projection Lens; Cleaning The Projector Cabinet - Eiki LC-XB43N Owner's Manual

Slide Shutter is provided to protect the surface of the lens
against scratches and dirt. When you are not using the
projector, close the Slide Shutter.
To open or close, slide the Slide Shutter on the front of the
cabinet.
Do not close the shutter when the projection lamp is on.
Unplug the AC power cord before cleaning.
Gently wipe the projection lens with a cleaning cloth that
contains a small amount of non-abrasive camera lens
cleaner or use a lens cleaning paper or commercially
available air blower to clean the lens.
Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents or other harsh chemicals might scratch
the surface of the lens.
Unplug the AC power cord before cleaning.
Gently wipe the projector body with a soft dry cleaning cloth.
When the cabinet is heavily soiled, use a small amount of
mild detergent and finish with a soft dry cleaning cloth. Avoid
using an excessive amount of cleaner. Abrasive cleaners,
solvents or other harsh chemicals might scratch the surface
of the cabinet.
When the projector is not in use, put the projector in
an appropriate carrying case to protect it from dust and
scratches.
CAUTION
Do not use any flammable solvents or air sprays on the projector and in its vicinity. The explosion or
fire hazard may occur even after the AC power cord is unplugged because the temperature inside the
projector is extremely high due to the lamps. In addition, there is a risk that the internal parts may be
damaged not only by the flammable air spray but also by the cold air.
Slide Shutter
Cleaning the Projection Lens
Cleaning the Projector Cabinet
Maintenance and Cleaning

Slide Shutter

65